Assume one packing unit weighs 15kg, what is the packaging requirement for Zone 2 direct accessible?假设一个包装单位重15公斤，那么zone 2可直接见到和触摸部分的包装要求是什么?
a) One wavy board 单层波浪紙板
b) Two wavy board 双层波浪紙板
c) Three wavy board 三层波浪紙板
d) Separated with 2mm foam or one wavy board 用2mm海绵或一层波浪紙板分开
e) Fully covered with foam 用海绵完全覆盖
5) Select the correct drop test height for ceramic items less than 9 kg请问9公斤以下的陶瓷物品正确的跌落测试高度是多少?
a) 100 mm
b) 300 mm
c) 500 mm
d) 1000 m
e) 1 m
7) Eurogroup has 4 quality levels with different on-site test requirements for each one of them. Which one does not belong to the group?Eurogroup有4个质量商標，每个级别都有不同的现场测试要求。哪一个不属于该组别？
a) Medium Quality 中等质量商標
b) Basic Quality 基本质量商標
c) High Quality (without added value)沒有附加值的高質量商標
d) High Quality (with added value)高品質帶有附加值的商標
e) Premium Quality 優質量商標
8) What is the acceptable range of moisture content measurement for premium products? 优质产品的水分含量测量的可接受范围是多少?
a) Indoor furniture 10-15%室内家具 10-15%
b) Children furniture 8-14%儿童家具 8-14%
c) Outdoor furniture 17%户外家具 17%
d) Indoor furniture 8-12%室内家具 8-12%
f) None of the above 以上都不是
10) When any deviation is found during barcode scanning or product assembly, what is should inspector do?在条形码扫描或产品组装过程中发现任何偏差时，验货员应怎么做?
a) Stop inspection, and contact client immediately停止检查，并立即与客户联系
b) Check with AE immediately and wait for client advice what to do next立即与客服AE联系，等待客户建议下一步做什么
c) Increase sample size from S1 to S3将样本数量检查从S1增加到S3
d) Continue inspection and issue pending remarks照常继续验货并在报告中发布Pending的注解
e) Check enough samples until no deviation is found检查足够的样品，直到没有发现偏差为止
